How to Disassemble HP 6930P

In this guide, I’ll disassemble a HP 6930P.

The pictures are very elaborate so I’ll only explain some cautious steps.


Make sure the laptop is turned off.



Release the battery latch.



    Remove the battery.

  • Remove all the screws on the bottom cover.

  • And open all the cover


Here’s how to remove the memory chips. Push the clips out and the memory chips will spring out.

Then pull it out directly.

  • Remove the screw.

  • Hold it and pull it out.

  • Then lift it up.



    Remove the remained screws on the bottom cover.

  • Push down the keyboard clips.


    Uncover it upwards.

  • Draw out the keyboard.


    Open it carefully. Do not pull the cables.


    Unplug the connector upwards and loose it.


    Unplug the cable then.

  • Two cables removed.


    The keyboard.

  • Pull open the left of the shortcut key.

  • And the right.

    Uncover a corner to loose it.


    Open it. Do not pull the cable.


    And unplug the cable the same way we did before.

    Remove 4 screws around the CPU radiator.


    Remove the screw securing the fan.



    Unplug the fan power cable.



    Lift up a corner of the fan.


    Draw it out.


    Lift up a corner of the heat dissipation.

  • Draw it out as the direction shows.

  • 图片:DSCN3727g.jpg






    And now reassemble it back.


Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
26 - 0.736 -24.150131225586